An above ground pool in East Islip with the winter cover lifted in the middle by the air pillow underneath.
Quick answer
An air pillow sits under the winter cover of an above ground pool. When the water freezes, the ice pushes in toward the pillow instead of out against the walls, protecting the walls, liner and cover. Inflate it to about 70% and tie it in the center with some slack.
Trouble with your cover or pillow this winter? Call (631) 472-6275 or sign up for Winter Watch, from $150 a visit.
Rocco RomanelliCo-owner and General Manager since 2018. Romanelli Pools has cared for Long Island pools since 1999. Our team includes Certified Pool & Spa Service Technicians (CST) and Certified Pool & Spa Maintenance Specialists (CMS).
A pool air pillow is a simple piece of winter gear that protects an above ground pool from ice damage.
What is a pool air pillow?
It’s an inflatable vinyl pillow that floats on the water under your winter cover.
What does a pool air pillow do?
Its main job is to protect your pool from the pressure of ice. The pillow sits under the cover and leaves room for the water to expand as it freezes. When ice builds up, it pushes in toward the pillow instead of out against the pool walls.
Without a pillow, that pressure can damage the cover, the liner and the walls themselves. A pillow is cheap insurance against costly repairs.
Rather skip the cold, wet work? We close Long Island pools from $299.
Inflate the pillow to about 70% full. If it’s filled all the way, it can’t compress.
Tie string to the grommets on the edges of the pillow.
Put the pillow in the middle of the pool (a broom helps) and tie the other ends of the string to the edge of the pool. We usually tie to the rail caps. Leave some slack, because the weight of the cover can snap a tight string.
Put the cover on, trapping the pillow underneath. You may want a second set of hands for this.
Secure the cover.
What size air pillow do you need?
We use a 4 x 4 foot pillow. Bigger pillows, like 4 x 8 feet, mean you need a larger cover to go over them, and a 4 x 4 does a fine job.
What should the pillow be made of?
Most air pillows are heavy-duty vinyl and are hard to puncture. Use a real air pillow, not a pool float. Floats are made of softer material that punctures far more easily.
Why placement matters
Keep the pillow in the middle of the pool. That spreads the weight of snow and ice evenly, which protects the liner and walls all winter. It also helps water and leaves run to the outer edges of the cover, so cleanup is easier and big chunks of ice are less likely to form.
Need a hand?
If you’re having trouble with your cover or your air pillow this winter, call (631) 472-6275 and we’ll close your pool for you. Above ground closings are $299. You can also sign up for Winter Watch, from $150 a visit.
Winter Watch
Skip the snow boots. We will check it for you.
Winter Watch visits clear your cover, check the water level and chemistry, test the cover pump and adjust safety cover straps.
About 70% full. A fully inflated pillow can't compress when the ice pushes against it.
What size air pillow do I need?
We use a 4 x 4 foot pillow. Bigger pillows like 4 x 8 feet mean you need a larger cover, and a 4 x 4 does a fine job.
Can I use a pool float instead of an air pillow?
No. Pool floats are made of softer material that punctures far more easily. Air pillows are heavy-duty vinyl.
How do I keep the air pillow in the middle of the pool?
Tie string to the pillow's grommets and to the edge of the pool, such as the rail caps, leaving some slack so the cover's weight doesn't snap it. Then put the cover on over the pillow.